D5CUB System Board Manual
Installing the Sound Drivers
Once you have connected your external sound devices, you
can install the sound drivers. NOTE: If you are installing a
CD-ROM drive, it is recommended you install it before
setting up the sound devices. See Installing a CD-ROM Drive
in Chapter 3.
1. Follow the instructions in Chapter 3 on connecting ex-
ternal sound devices.
2. If you previously installed another sound card, remove
it and all associated files from your AUTOEXEC.BAT
and CONFIG.SYS files. If you are using Windows 3.1x,
you must also remove all associated files from the
WIN.INI and SYSTEM.INI files. (For more information,
please contact the sound driver manufacturer.)
3. Start your computer system.
4. Insert the sound driver disk into your floppy drive.
5. If you are using Windows 3.1x, run A:\SETUP from the
Program Manager File menu.
6. If you are using Windows 95, refer to the Windows 95
user’s manual for instructions on how to install sound
drivers.
7. If you are using OS/2, refer to the README file on the
OS/2 disk for instructions on how to install sound driv-
ers.
8. Once the software is copied, the install program
automatically updates the system files.
Chapter 5: Installing Sound Device Drivers
56
To Next Page
Loading...
Need help?
General