Microscan Visionscape FrontRunner - Page 76

Chapter 2 FrontRunner™
2-54 Visionscape FrontRunner™ User’s Manual v4.1.3, April 2012
Range: 2000 - 5000 and 49210 - 49500
• Options — Displays a dialog box containing tabs for the following:
–Runtime
• PC Runtime Priority — This setting is used when
FrontRunner™ is running a vision application. When the
application starts, the runtime priority of the process is
changed using this setting. The options are “Normal”, “High”,
and “Realtime”.
Note: You must be logged into an account that has access
rights to change the process setting accordingly. By default,
only Administrators and Power Users have this right. It can
be changed for Windows XP in the Control Panel >
Administrative Tools > Local Security Policy console. In the
console, select the Local Policies group, and then User
Rights Assignments. You’ll need to add your user account to
the “Increase scheduling priority” setting if you are not
running as an Administrator.
– Reports — From this page, you can set the start-up options for
the report and decimal accuracy:
• Number of x decimal places — Use this option to set the
decimal accuracy of floating-point values in the report. The
default is 3 for pixel decimal places; the default is 5 for world
decimal places.
• Use Calibrated Space when activated — When this option is
checked and the report is activated, by default, the report will
use calibrated space. Otherwise, values are shown in the
report in pixel space when the report is started.
View Menu
The View menu contains the following menu items:
• Network Overview — Displays the Network Overview window, which
displays critical information about VS-1 Smart Cameras on the
network. See “The Network Overview Window” on page 2-45.