Listing of Memory Devices
MC9S12DG256 (U2)
n (U2) 256KB Flash program memory. This Flash memory is used for microprocessor pro-
gram storage. This part is not reprogrammed in normal operation. The content in this
device is non-volatile and there is no procedure to clear this memory. This part is
soldered to the PCB.
n (U2) 12KB RAM. This RAM is embedded in U2 and is used as operating memory. The
content in this device is volatile and is lost when the SyncServer is powered down. This
part is soldered to the PCB.
n (U2) 4KB EEPROM. This EEPROM is embedded in U2 and is used to store non-volatile
configuration data. This part is soldered to the PCB.
Page 146..........................................................................997-01520-02 Rev. G2
To Next Page
Loading...
