Need help?Do you have a question about the Microsemi SyncServer S350 and is the answer not in the manual?
Guide to initial setup and configuration steps for the SyncServer device.
Procedures for safely shutting down the SyncServer device.
Details on accessing and logging into the web interface, including security settings.
Viewing system, network, timing, and NTP status information.
Procedures for upgrading software and performing factory resets.
Using the STATUS button to view system information screens.
Accessing the device's function menu via the keypad.
Description of physical ports, connectors, and indicators on the device.
Details on timing accuracy, stability, and performance metrics.
Information on regulatory compliance and safety standards.
Step-by-step guide for installing the SyncServer.
Steps for initial network configuration of the primary LAN port.
Guidance for resolving common issues and problems.
Procedure for downloading and installing software updates.
Managing device configurations through backup and restore.
Definitions of important terms like GPS, NTP, PTP, and Stratum.
General| Model | SyncServer S350 |
|---|---|
| GNSS Support | GPS, GLONASS, BeiDou, Galileo |
| Stratum Level | Stratum 1 |
| Form Factor | 1U Rackmount |
| Category | Time Server |
| Time Synchronization Protocols | NTP, PTP |
| Network Interfaces | 2 x 10/100/1000BASE-T Ethernet |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Dimensions | 44.45 mm H x 482.6 mm W x 304.8 mm D |
| Management | Web-based, SNMP |
| GPS Receiver | Built-in GPS |
To Next Page
