Need help?Do you have a question about the Microsemi SyncServer S250i and is the answer not in the manual?
Steps to configure the SyncServer's network and initial settings.
Overview of the SyncServer's key features and advantages for network synchronization.
Instructions for accessing the SyncServer's web interface and login procedures.
Details on system status, network status, timing, GPS, and alarms.
Configuration and status of network ports, Ethernet settings, SNMP, and ping tests.
Configuration and status of NTP associations, MD5 keys, and preferences.
Configuration of time zones, hardware clocks, and timing references.
Configuration of GPS and IRIG-B input references.
Management of system hostname, software upgrades, and factory resets.
Configuration of web interface, users, alarms, and logs.
Management of daemon states, startup, HTTP, SSH, and email services.
Wizards for initial setup, NTP, SNMP, backup, restore, and upgrades.
Lists and explains essential CLI commands for system status and control.
Timing accuracy and stability specifications based on synchronization sources.
Technical details and specifications for the internal GPS receiver.
Compliance with various safety directives and standards.
Compliance with electromagnetic compatibility standards.
Details of the Ethernet ports (LAN1, LAN2, LAN3) and their configurations.
Guidelines for mounting the SyncServer in a standard 19-inch rack.
Procedures for properly grounding the SyncServer chassis and rack.
Steps for connecting the AC power supply to the SyncServer.
Steps for connecting the optional DC power supply.
Guide to selecting a site, installing, and using the GPS antenna for time synchronization.
Solutions for problems accessing or using the web interface.
Troubleshooting steps for issues with receiving alarm notifications via email or SNMP.
General| Product Name | SyncServer S250i |
|---|---|
| Form Factor | 1U Rackmount |
| Input Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| GNSS Support | GPS, GLONASS, BeiDou, Galileo |
| Operating Temperature | 0°C to 50°C |
| Time Synchronization Protocols | NTP, PTP |
| Network Interfaces | 2 x 10/100/1000Base-T Ethernet |
| Dimensions (H x W x D) | 4.4 cm x 43.2 cm x 35.6 cm (1.75 in x 17 in x 14 in) |
| Category | Time Server |
To Next Page
