NETWORK Tab
NETWORK-SNMP
This page provides configuration of basic SNMP settings and the creation of SNMPv3 users.
Basic Configuration
Establish the identity and community membership of the device.
sysLocation: Identify the location of the SyncServer (e.g. Server Room A, Company Divi-
sion B, etc). Used by network management consoles.
sysName: Provide the SyncServer with a unique name. (This is distinct and separate from
"hostname" on the SYSTEM - General and STATUS - General pages.) Used by network
management consoles.
sysContact: The name of the individual responsible for the SyncServer. Used by network
management consoles.
Read Community: The SNMP read community string. The string must be provided for
SNMP v1/v2c GETS/WALKS to gain access.
Write Community: The SNMP write community string.
Note: At this time, the SyncServer does not support any writable SNMP variables.
V3 Users
SNMP user names are separate and distinct from the access control list usernames used to
log in to the SyncServer's user interfaces. SNMP user names are used by the network man-
agement software.
This is the list of SNMP v3 users. To delete a user, select the checkbox for a user name and
click the DELETE button. When prompted, enter the passphrase specified when the user
was created. The SNMP admin user cannot be deleted.
(Using SNMP v3 requires an SNMP v3 user on the recipient systems' SNMP v3-capable
agent/client)
User Name: Name of v3 User.
Mode: Currently only rouser (read-only user) mode is supported.
Level: Shows the Min Priv level of the user (see Min Priv, below):
n auth: Authentication
n noauth: No Authentication
n priv: Auth and Privacy
n blank: default level for admin
Add v3 User
To create an SNMPv3 user, complete the form and click the SAVE button.
Name: Alphanumeric user name, with no spaces or special characters.
Auth Phrase: Create a unique authentication passphrase for the user. It must be at least
eight characters long.
997-01520-02 Rev. G2.......................................................................... Page 31
To Next Page
Loading...
