Do you have a question about the Microsemi SyncServer S300 and is the answer not in the manual?
Provides contact details for technical support and general inquiries.
Outlines the terms of the product warranty and limitations of liability.
Steps to perform the initial setup and configuration of the SyncServer.
Understanding status LEDs and safe procedures for halting the SyncServer.
Highlights the main technical capabilities and advantages of the SyncServer.
Compares features and specifications across different SyncServer models.
Details on accessing the SyncServer's web interface, including credentials.
Monitoring general system, network, timing, and GPS status via the web interface.
Configuration of Ethernet ports, SNMP, NTP, and PTP settings.
Managing users, alarms, services, and security settings via the web interface.
Guided process for initial SyncServer configuration.
Tools for saving and retrieving SyncServer configuration settings.
Wizard for updating the SyncServer's firmware.
Description of the components and indicators on the SyncServer's front panel.
Details on the various input/output connectors on the rear panel.
Information regarding safety standards and regulatory compliance.
Guidance on unpacking, mounting, grounding, and power connections.
Procedures for installing and configuring the GPS antenna for time synchronization.
Steps to configure network interfaces, including LAN1.
Guidance on resolving common problems like password issues, alarms, and NTP clients.
Detailed steps for downloading and installing software updates.
Setup for NTP associations, authentication, and client synchronization.
Methods for saving and restoring system configurations.
Configuring GPS or non-UTC time distribution.
Explanations of command-line interface and Global Positioning System concepts.
Information on NTP daemon, packets, and Precision Time Protocol.
Definitions of NTP stratum levels and reference clock identifiers.
| Model | SyncServer S300 |
|---|---|
| Network Interfaces | 2 x 10/100/1000Base-T Ethernet ports |
| Form Factor | 1U Rackmount |
| Type | Time Server |
| Time Synchronization Protocols | NTP, PTP |
| GNSS Receiver | GPS, GLONASS, BeiDou, Galileo |
| Input Power | 100-240 VAC |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |