Web Interface
n All settings defined on the ADMIN pages (Web, Users, Alarms, Logs Config), including
the username and password settings.
n All services are reset to their default modes of operation.
n Hardware Clock settings, including forced mode, Time Zone, Position and Time Error
Limit, IRIG Input and Output, etc.
n All cryptographic materials (NTP keys, sshd keys, SNMP users and communities)
deleted.
n Logs are erased.
Also see Backing Up/Restoring Configurations (on page 165), Configuring LAN1 (on
page 148), and Logging in to the Web Interface (on page 149).
FactoryDefaultSettings
Note: The S350i SyncServer does not include a GPS receiver,LFradio, or modem.
NETWORK – Ethernet
For LAN1:
Connection Mode: Static
IP Version: IPv4
IP Address: 192.168.0.100
Mask255.255.255.0
Gateway: 192.168.0.100
Redundant: 000.000.000.000
Allowed Access: Null
Speed/Duplex: Auto
For LANGBE, LAN2, LAN3:
Connection Mode: Disabled
IP Version: None
IP Address: None
Mask: None
Gateway: None
Redundant: None
Allowed Access: None
Speed/Duplex: None
Mgmt Port User DNS Servers: Null
NETWORK – SNMP
sysLocation: unknown
sysName: SyncServer
sysContact: admin@localhost
Read Communitysymmpublic
Write Communitysymmprivate
User Name: admin
Page 78..........................................................................997-01520-02 Rev. F1
To Next Page
Loading...
