Web Interface
System Control: Run
SERVICES – HTTP
Security: Standard (Port 80) Only
SERVICES – SSH
Protocol: SSH-1 & SSH-2
Log Level: INFO
Server Key Bits: 768
Key Regeneration: 3600 Seconds
SERVICES – Email
SMTP Gateway: Null
User1-10: Null
SYSTEM - Options
Use this page to install available options.
See "How to Activate the PTP Option" on page 53 to install the PTP option
This page gives:
l The SyncServer serial number for use in obtaining the option key.
l A text box for entering the option key.
l Two text boxes showing both the available options and installed options.
l Buttons to apply the available options or cancel the process.
ADMIN - Web
Use this page to:
n Configure the appearance and information displayed on the login page.
n Modify the behavior of the web interface.
Login Page Configuration
The settings in this section configure the Login page to:
n Display status information. This is convenient for monitoring status without logging in, par-
ticularly if LAN1 is on a private administrative network.
n Remove status and information that identifies the SyncServer from the login page. This
makes it more difficult for unauthorized users to recognize the SyncServer via its web
interface.
The login page choices are:
Page 82..........................................................................997-01520-02 Rev. F1
To Next Page
Loading...
