Product Overview
The SyncServer Network Time Server offers the following protocols for synchronizing equip-
ment over a network:
n NTP
n PTP Grand Master (option)
n SNTP
n Time (TCP and UDP versions)
n Daytime (TCP and UDP versions)
n Sysplex Output (dedicated port)
These protocols are capable of synchronizing computers, servers, and networking equip-
ment on an enterprise-scale network to within milliseconds of official UTC time. This degree
of synchronization is desirable for precise time-stamping of events and data correlation.
Key Features
n Ultra High-Bandwidth NTP Time Server
n Stratum 1 Operation via GPS* Satellites
n Gigabit Ethernet port plus 3 additional Independent 10BASE-T/100BASE-TX Ports
n Internal Dial-up Modem* for Time Reference Redundancy
n Independent Time References: GPS, Timecodes, 1PPS, 10MHz
n Versatile Timing Outputs: IRIG A/B/E/G/NASA36/XR3/2137 AM or DCLS, 1PPS,
10MHz, Sysplex
n Stratum 2 Operation via NTP Servers
n RADIUS, NTPv4 Autokey, MD5 Authentication
n TACACS+Authentication
n Secure Web-Based Management
n SSH, SSL, SCP, SNMP, Custom MIB, HTTPS, Telnet, and More
n IPv6 and IPv4 Compatible
n Nanosecond Time Accuracy to UTC
n Alarm Relays
n Rubidium & OCXO Oscillator Upgrades
n Upgrade to Radio Broadcast Time Sync
n IEEE 1588 / PTP Grandmaster Option
n Time Interval Measurement Option
* Note, the S350i SyncServer does not feature a GPS receiver, or modem.
Key Benefits
n Synchronize Hundreds of Thousands of Client, Server & Workstation Clocks
n Very Reliable and Secure Source of Time for Your Network
n Multiple NTP Ports for Easy Network Configuration and Adaptation
n Extremely Accurate Time Source for Network Synchronization
997-01520-02 Rev. F1.......................................................................... Page 17
To Next Page
Loading...
