Microsemi SyncServer S250i - Factory Default Settings; Login - default settings; Network Ports - default settings; NTP - Default Settings

Login - default settings
Factory Default Settings
Login - default settings
Login - Default Settings
User Name:admin
Password:symmetricom
See also: Changes to Passwords and User Names (see "Properties of User Names and
Passwords" on page 20)
Network Ports - default settings
Network Ports - Default Settings
Port IP Version IPv4 Address Link Speed State
LAN1 IPv4 Static - 192.168.0.100Auto NegotiatedEnabled
LAN2 Disabled
LAN3 Disabled
SNMP
SNMP - Default Settings
Basic Configuration
sysLocation:unknown
sysName:SyncServer
sysContact:admin@localhost
Read Comunity:symmpublic
Write CVommunity:symmprivate
NTP
NTP - Default Settings
997-01520-02 Rev. G2.......................................................................... Page 171