STATUS Tab
Position: The latitude and longitude of the GPS antenna in degrees, minutes, and fractional
seconds. Referenced to WGS-84.
Altitude: The altitude of the antenna in meters. Referenced to WGS-84.
Satellites: The list of GPS satellites visible to the receiver:
n Sat Number: The GPS satellite's Satellite Vehicle (SV) number, a unique identification
number
n Signal: The relative strength of the GPS signal (dBW = decibels relative to 1 Watt).
n Status: "Current" means that the receiver is using the GPS signal in its timing solution.
"Tracked" means the receiver is tracking the signal, but isn't using it in the timing solution.
See GPS (on page 173) default settings
STATUS-NTP
This page displays the status of the NTP Server.
Values are displayed for:
n system peer
n system peer mode
n leap indicator
n stratum
n precision
n root distance
n root dispersion
n reference ID
n reference time
n system flags
n jitter
n stability
n broadcast delay
n authdelay
See default settings:
n NTP (on page 171)
n NTP Override Behaviour (on page 172)
STATUS-Alarms
Current Major or Minor Alarms
Alarms with Severity set to:
n Major are displayed in red text.
n Minor are displayed in orange text.
n Notify are not displayed.
997-01520-02 Rev. G2.......................................................................... Page 25
To Next Page
Loading...
