Microsemi SyncServer S250 - Sysplex

REFERENCES
Sysplex
Sysplex - Default Settings
Sysplex Output Configuration
Autostart is set to: No
Parity is set to: Odd
Flywheel Quality Character is set to: X
REFERENCES
GPS
GPS - Default Settings
GPS receiver set to Survey mode
GPS Antenna Cable Delay (nS) set to 0 (zero) nanoseconds
IRIG-B
IRIG-B Default Settings
Input Mode:Auto
Output Mode:IRIG-B with IEEE 1344 extension
Output Type:UTC
Cable Delay:0 (zero) nanoseconds
SYSTEM
System - Default Settings
General
Hostname - SyncServer
Check for software upgrades is Selected
ADMIN
LoginWebpageConfiguration
Login Webpage Configuration - Default settings
997-01520-02 Rev. G2.......................................................................... Page 173