24 Port Gigabit Ethernet PoE Switch – User Manual Page 44 of 72
________________________________________________________________________
©2014 MICROSENS GmbH & Co. KG – Hamm/Germany www.microsens.com
Parameter description
Mode:
Controls whether Loop Detection is enabled (as a whole).
Unlock Time:
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action is to shut down the port).
State:
Show the status of this port.
Protocol Enabled:
Controls whether Loop Detection is enabled on this switch port
When port number is chosen and enable port's Loop Detection, the port can de-
tect loop happens and port will be locked. If loop did not happen, port maintains
unlocked.
Unlock port:
When ticking the port, port locked will be opened and turned into unlocked. If
not ticking the port, port maintains locked.
To Next Page
Loading...