Microsens MS400830M - 1-4. View of 24 Port Gigabit Ethernet Switch

24 Port Gigabit Ethernet PoE Switch – User Manual Page 3 of 72
________________________________________________________________________
©2014 MICROSENS GmbH & Co. KG – Hamm/Germany www.microsens.com
1-4. View of 24 Port Gigabit Ethernet Switch
Fig. 1-1 Full View of 24 Port Gigabit Ethernet Switch: MS400830M
1-4-1. User Interfaces on the Front Panel (Button, LEDs and Plugs)
There are 20 TP Ports (10/100/1000Base-T) and 4 dual media ports (UTP/SFP) on
the front side. LED display area, locating on the left side of the panel, contains a System
LED, which indicates the power status and 24 port LEDs working status of the switch. Be-
low the system LED there are 3 LEDs (Link/Act, Speed, PoE) which indicate the LED
mode. The LED mode can be change by pressing the Mode button. Warning! Pressing the
Mode button for around 5 seconds will cause a Factory Default Reset.
Fig. 1-2 Front view