Microsens MS400830M - Management Specifications

24 Port Gigabit Ethernet PoE Switch – User Manual Page 72 of 72
________________________________________________________________________
©2014 MICROSENS GmbH & Co. KG – Hamm/Germany www.microsens.com
 Cable and Maximum Length
TP
Cat. 5 UTP cable, up to 100m
1000Base-SX
Up to 220/275/500/550m,
which depends on Multi-Mode Fiber
type
1000Base-LX
Single-Mode Fiber, Distance depends
on used SFP
 Diagnostic LED
System LED: System, Link/Act*, Speed*, PoE*
(* shows port LED mode)
Per Port LED: Link/Act/Speed
 Power Requirement
Voltage: 100-240VAC
Frequency: 50-60Hz
Consumption: 34W (typ.) except PoE
435W (typ.) with GBE Links and full PoE on all ports
PoE max.: 370W
 Ambient Temperature: 0-40° C
 Humidity: 10-90 % Relative Humidity
: 10% to 90%
 Dimensions: 44(H)x442(W)x211.2(D)
Management Specifications
System Configuration
Auto-negotiation support on
10/100/1000Base-TX ports,
Web browser can set transmission speed
(10/100/1000Mbps) and operation mode
(Full/Half duplex) on each port, enable /
disable any port, set VLAN group, set
Trunk Connection.
RSTP / STP Function
(Rapid) Spanning Tree
VLAN Function
Port-Base / 802.1Q-Tagged, allowed up to
24 active VLANs in one switch.
Trunk Function
Ports trunk connections allowed
Quality of Service
(QoS)
Referred as Class of Service (CoS) by the
IEEE 802.1P standard; Two queues per port
Network Management
Web browser support based on HTTP Server
Note: Any specification is subject to change without notice.