Need help?Do you have a question about the Microsens MS453510M and is the answer not in the manual?
General| Model | MS453510M |
|---|---|
| Category | Switch |
| Device Type | Managed Switch |
| Number of Ports | 10 |
| Port Type | Gigabit Ethernet |
| Layer | Layer 2 |
| Power over Ethernet (PoE) | No |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9K bytes |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Ports | 10 x Gigabit Ethernet |
Lists the key features and capabilities of the managed switch.
Specifies the physical dimensions of the managed switch.
Describes the components and indicators on the front panel of the switch.
Example of using the switch as a standalone device for a small workgroup.
Application of the switch as a segment bridge for enterprise networks.
Overview of the web-based management features and capabilities.
Details on how to access and log into the switch's web management interface.
Configuration of re-authentication parameters and EAP timeouts for 802.1X.
Instructions for resetting the switch to its factory default configuration.
Process for upgrading the switch's firmware via the web interface.
Troubleshooting steps for common cable and connection issues.
Pin assignments for 10/100BASE-TX RJ-45 connectors.
To Next Page
