microTec
13
2.8 Servicing and Fault Clearance
Servicing
To secure the quality of the microtomic section and operational reliability of the rotary
microtome, a routine service should be carried out once a year. Servicing should only
be carried out by a trained service engineer.
Service Contract
microTec offers a service contract which guarantees that your instrument will remain in
a perfect operational condition.
Fault Clearance
Malfunctions, which can adversely affect safety, are to be rectified immediately.
2.9 Structural Modifications and Replacements to the Instrument
• No modifications, conversions or enhancements may be made to the instrument
without the approval being given by the manufacturer.
• All conversions require written confirmation issued by microTec.
• Replace components which are not in proper working order immediately.
• Only use original replacement and consumable parts and items.
• It cannot be guaranteed that parts sourced from other suppliers are
designed and manufactured to meet safety and reliability conditions.
To Next Page
Loading...