Microtec CUT4060E - Warranty and Liability; Warranty

microTec



6
1.4 Warranty and Liability
The company – microTec GmbH – certifies that this instrument has been carefully
tested and inspected. Verification to ensure adherence to the technical specification
data published has been carried out prior to shipping out the instrument from the
factory.
No liability is assumed for the correctness of technical data and other data or drawings.
Reserve technical changes.
The instrument is assigned to Class 4 of the MedGV (legislation governing medical
supplies). Observance of existing legislation and regulation is assured.
1.5 Warranty
Warranty is provided for this microTec product in the event of any deficiencies or
defects in material or workmanship for a period of 12 months. Defective parts will be
repaired or replaced free of charge during this period of time. Any additional claims
made under the warranty of whatsoever nature are excluded. Neither does the
warranty provide cover for any claims arising from services and supplies provided by
third parties.
In principle, our “General Conditions of Sale and Supply“ shall apply. These
conditions are made available to the prospective operator of the instrument, by, at the
latest, the signing of the contract. Warranty and liability claims for personal injury and
material damage are excluded if attributable to one or more of the following causes:
• Improper use of the instrument!
• Incorrect installation and assembly, commissioning, operation and servicing of
the instrument!
• Operating the instrument with the safety devices defective or safety
mechanisms and guards inappropriately fitted!
• Disregarding instructions given in the operating manual concerning
transportation, storage, installation, commissioning, servicing and equipping of
the instrument!
• Unauthorized tampering and structural modification to pneumatic, electrical and
mechanical components!
• Ineffective or incorrect monitoring of machine parts which are subject to wear!
• Improperly effected repairs!
• Catastrophes caused by external influences and force majeure!