Need help?Do you have a question about the Microtek ArtixScan 120tf and is the answer not in the manual?
Power| voltage | AC 90V to 264V, 47-63 Hz |
|---|
Operating Environment| operating temperature | 50° to 95°F (10° to 35°C) |
|---|---|
| relative humidity | 20% to 80% |
Scanning Specifications| scanning area | 6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm |
|---|---|
| resolution optical | 4, 000 dpi x 4, 000 dpi |
| resolution interpolated | 16, 000 dpi x 16, 000 dpi |
Interfaces| firewire ports | Two |
|---|---|
| scsi ports | Two |
| transmission speed firewire | 4 Mbytes/s |
| transmission speed scsi | 2 Mbytes/s |
Weight and Dimensions| dimensions | 19.8" x 10.8" x 5.5" (504 x 274 x 142 mm) |
|---|---|
| weight | 17.6 lb (8 kg) |
Details hardware and software needed for scanner operation.
Specifies optimal conditions for scanner placement and operation.
Guide to inspecting the scanner and its accessories upon arrival.
Identification of key components and indicators on the scanner.
Step-by-step guide for installing scanner software on Mac and PC.
Instructions for connecting the scanner using the FireWire interface.
Instructions for connecting the scanner using the SCSI interface.
Guidance on placing slides and filmstrips using film holders.
Procedures for inserting and removing film holders from the scanner.
Step-by-step guide to performing an initial scan with the software.
Guide to calibrating the scanner and creating ICC profiles.
Technical details and performance metrics of the scanner.
Information on accessing further documentation on the CD-ROM.
To Next Page
