Microtek ArtixScan 120tf User Manual

20 ArtixScan 120tf Installation and Operation Manual
Specifications
Interfaces Two FireWire (IEEE-1394) ports; two SCSI-2 ports
Dynamic Range 4.2 Dmax
Scanning Modes Color, grayscale, and black-and-white in a single
scanning pass
42-bit color input and output
14-bit grayscale
Scanning Area 6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
Resolution Optical: 4,000 dpi x 4,000 dpi
Interpolated: 16,000 dpi x 16,000 dpi
Transmission Speed 4 Mbytes/s (FireWire)
2 Mbytes/s (SCSI)
Dimensions (L x W x H) 19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
Weight 17.6 lb (8 kg)
Voltage AC 90V to 264V, 47-63 Hz
Environment Operating temperature: 50° to 95°F (10° to 35°C)
Relative humidity: 20% to 80%
Additional Documentation in the CD-ROM
Additional documentation is provided in the Microtek CD-ROM that contains
ScanWizard Pro TX, Scanner ICC Profiler, troubleshooting, etc. If you experience
problems with the hardware or software, you can open the file that you wish to view
with Adobe Acrobat Reader or your browser, then read or print the information.

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)