Microtest CT-8750 - Page 38

CHAPTER III Sequence Test Setup
P 37
(i) Move cursor to T(Type)，LCD display as following
(j) Press S1[R ]/S2 [L]/S3[C ]/S4[D ] to select item which want to setup
(k) The symbol as follow:R-Resistance, L-Inductance, C-Capacitance, D-Diode
(l) After selected, Press [Enter] cursor will move to ”P+”, LCD display as
following
(m) Use S1[A] or S2[B] to select A/B, and use alphanumeric to enter setup pin
(n) Press [Enter] to confirm
(o) Cursor will move to “Std-Val”, LCD display as following