20 Chapter 3: Using The VeniceU With USB
VeniceU
Operator Manual
3 In the User Account Control dialog
box, click Yes.
4 In the “Welcome ...” screen of the
Setup dialog box, click Next.
5 In the “Choose Install Location” screen
of the Setup dialog box, choose the
destination of the USB driver and click
Install.
The installation will begin.
6 During the installation procedure the
following dialog box will appear. Plug
the USB cable into the VeniceU console
(type B connector) and into your PC
(type A connector). Then switch on the
console and click OK in the dialog box.
To Next Page
Loading...
