1 CCM-270A/WS
201807 73
3. The Auto mode supporting units have five types of operating modes: Auto, Cool, Heat, Dry, and Fan. In the Auto mode,
"C" is the cooling temperature, and "H" is the heating temperature. In the Cool, Heat and Dry modes, "C" is the
temperature set point. "H" has no impact on set point. In Dry mode, the default fan speed is Speed 1 and cannot change.
You cannot adjust the set temperature in Fan mode. The range of the set temperature is 17-30.
4. In the Non- Auto mode, there is only one temperature set point (which does not have an Auto mode). The rest are
similar to that in the Auto mode.
To Next Page
Loading...
