Midea MC-SU60-RN1L Service Manual

Aqua Tempo Super II
94 201709
Midea Aqua Tempo Super II
Service Manual
4.23 FP Troubleshooting
Digital display output 4.23.1
Description 4.23.2
 FP indicates pump in a combination system dial to different status. When the FP displayed, a manual system restart is
required before the system can resume operation.
 All units stop running.
 Error code is only displayed on main PCB and user interface.
Possible causes 4.23.3
 The S5_3 of slave units is different with the master unit.
 Main PCB damaged.
Procedure 4.23.4
H6
The S5_3 of slave units is different with
the master unit
1
Yes
Adjust the switch of S5_3
No
Replace outdoor main PCB
Note:
1. Dial switch S5 on the main PCB (labeled 3 in Figure 4-2.1 in Part 4, 2.2 “Outdoor unit main PCB”)

Midea MC-SU60-RN1L Specifications

General

Brand	Midea
Model	MC-SU60-RN1L
Category	Chiller
Language	English