EasyManua.ls Logo

Midea MT-200R20E20 - Maintenance; Pre-Operation Checks; Troubleshooting Abnormal Situations

Midea MT-200R20E20
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
8 MAINTENANCE
8.1Conrmationbeforerunning
1)Makesurewhethergroundwireisbrokenorfallo󰀨.
2)Poweronthemachineafterallconnectionsarequalied.
8.2Troubleshootingwhenabnormalsituationhappens
Before asking for serving or repairing, check the following points:
Non-mechanical malfunction
1) Water oozes from safety valve pressure relief opening
-Whenwaterheating,coldwaterwillexpandwhenheated,wateroozingisnormal.Donotblockitforsafetyconsideration.
-Ifalargeamountofwaterows,itmeanssafetyvalveisinvalid.Stopusingandreplacesafetyvalve.
2) Long period for heating a tank of water
-Inwinter,waterheatinge󰀩ciencywilldecreasebecauseoflowambienttemperature(about0°C).Itwilltakealongertimefor
water heating.
- If customer needs to use hot water, please start the unti in advance.
Need to check
1) Automatically start or stop
- Whether we set timer wrongly. 2) When not working
- Check whether powering on.
- Whether manual switch is on.
- Whether fuse blows.
- Whether start the protection device (indicator lights).
- Whether it is not the time of timer on. (Operation lamp lights.)
3)Ifheatinge󰀨ectisnotgood
- Whether air outlet and inlet has been blocked.
Ifthefollowingsituationhappens,pleasestoprunningandcuto󰀨powersupplymanuallyandcontactwiththedealer
or service center.
-ON/OFFoperationisine󰀨ective.
- Fuse or RCCB trips frequently
Before leave unused for a long time, please complete the following items:
- Drain water from tank and pipes, close all valve bodies.
After leave unused for a long time, please check the following items:
- Check air inlet and outlet of the unit to see whether they are blocked. Clean immediately when they are blocked.
- Check whether water pipes, valves have been damages or blocked. Whether there’s water leakage in joints,
replace them wwhen water leaks.
-Itissuggesttoinspectanodeprotectionmaterialeveryhalfyear.Ifithasbeenexhausted,pleasereplaceitwith
a new one.
CAUTION
8.3 After-sale service
Incaseofmalfunctions,pleasecuto󰀨thepowerswitchandcontactafter-saleservicecentreortechnicalservicedepartment,for
detailed information please refer to User Service Guide.
8.4 Important information for the used refrigerant
Thisproducthastheuorinatedgas,itisforbiddentoreleasetoair.
Refrigerant type: R134a; Volume of GWP: 1430;
GWP=Global Warming Potential
Table 8-1
Factory charge
Refrigerant/kg tonnes CO
2
equivalent
0.9 1.29

Related product manuals