Midland Base Tech III - Key Controls; Key Functions (No Shift); Key Functions (With Shift)

Base Tech III Operating Manual
3
3) Key controls
a/ Key entry without SHIFT key
0-9 : channel numbers and individual call address (target address)
A: P-25 calls (Group call, All call, Individual call)
B: The beginning and the end of individual call number
C: No function
D= P-25 mode (analog or digital)
*= Cancel channel number, individual number
#= Ending channel number, individual number
CH= Channel number entry, depress CH, then 0-9 for channels
F(Scan)= No function
MON= monitor ON or OFF '
Rotary knob: Volume, Squelch, Back Light Dimmer level
b/ Key entry following to SHIFT key
0= P-25 test mode start and finish
1=back light ON/OFF
2=Tx power Hi/LOW
3=No function
4=No function
5=No function
6=No function
7=lndicating channel data
8=Key lock ON/OFF
9=No function
A= No function
B= No function
C= No function
D= No function
*= Indicating P-25 data
#=No function
CH= Toggle Bar-Graph ON/OFF
F(scan)= No function
MON=P-25 squelch. normal or selective squelch