Midland CT2000 User Manual

Midland CT2000 instruction guide | 15
Scan mode 13 Scan mode TO, CO, SE
Display Mode 14 Selection amongst: frequency
mode, channel mode and
memory mode
Vfo Mode, CH Display
Mode, MR Display Mode
Repeater Tone 15 Selection of the repeater access
tone
1750Hz, 2100Hz, 1000Hz,
1450Hz
Password lock 16 Lock with password OFF, ON
Back Light 17 Backlight on interval On, 5s, 10s
Step 18 Frequency step selection 2,5 - 5 - 6,25 - 7,5 - 8,33
- 10 - 12,5 - 15 - 20 - 25 -
30 - 50 kHz
Sub screen 19 Selection of the function in the
upper part of the screen
OFF, Frequency, Voltage
Key fun PW 20 Selection of the function of the
PW control
A/B, LOW, MONI, SCAN,
TONE,M/V,MHZ,MUTE
Key fun Mz 21 Selection of the function of the
Mz control
A/B, LOW, MONI, SCAN,
TONE,M/V,MHZ,MUTE
Key fun CT 22 Selection of the function of the
CT control
A/B, LOW, MONI, SCAN,
TONE,M/V,MHZ,MUTE
Key fun V/M 23 Selection of the function of the
V/M control
A/B, LOW, MONI, SCAN,
TONE,M/V,MHZ,MUTE
Key fun A/B 24 Selection of the function of the
A/B control
A/B, LOW, MONI, SCAN,
TONE,M/V,MHZ,MUTE
Instr Screen 25 Welcome message OFF, Char String, Picture
TX Channel 26 Selection of the tx mode
between selected channel/VFO
and last received channel/VFO.
Last Received, Select
TX inh 27 Enabling of the tx lock Tx Enable, Tx Inhibit
Reset 28 Reset Factory, Setup
Sub ring 29 Rx beep sound in the sub-VFO OFF, ON
* the option list may vary in case some DTMF settings have been modified with the op-
tional programming kit.

Midland CT2000 Specifications

General

Brand	Midland
Model	CT2000
Category	Transceiver
Language	English