30 | Midland CT2000 instruction guide
Troubleshooting
PROBLEM SOLUTION
The radio does not turn on Power supply cable disconnected or defective.
Check its status.
Fuse broken. Check the status of the fuses in
the radio and in your vehicle.
The display shows RX but the
radio does not receive
Verify the volume level is not too low!
Check that you have set the same CTCSS to-
nes and DCS codes of your group.
The keypad does not work The keypad lock is activated
While you are communica-
ting with your group, you
receive interferences from
other groups
Change the CTCSS tone or DCS code of your
group
To Next Page
Loading...
