Model MXT100
Power On/Off
To turn the radio on and off:
1. With the radio off, press and hold the Power On/Off
button for two
seconds to turn the radio on.
The LCD display will show all icons for one second and then display
the most recently selected channel.
2. With the radio on, press and hold the Power On/Off button for two
seconds to turn the radio off.
The LCD display will go blank when the radio turns off.
Selecting the Active Channel
IMPORTANT! To communicate between two MXT100 radios, both
radios must be set to the same channel and Privacy Code (see
Selecting a Privacy Code) selections.
To select the active channel:
1. Be sure the radio is turned on (see Power On/Off).
2. Press the Channel Up
button to scroll forward through the available
channels. Press the Channel Down
button to scroll backward
through the available channels.
The Channel icon on the LCD display will show the currently
selected channel.
Transmitting and Receiving a Call
IMPORTANT! To communicate between two MXT100 radios, both
radios must be set to the same channel (see Selecting a Privacy
Code) selections.
To transmit and receive a call:
1. Be sure the radio is turned on (see Power On/Off).
2. To transmit a call, press and hold the PTT button on the microphone,
and speak into the microphone in a normal voice.
NOTE: For maximum clarity, hold the microphone 2 to 3 inches from
your mouth when speaking.
midlandusa.com Page 12
To Next Page
Loading...
Need help?
General
