The selected channel is removed from the list of “scanned” channels
and will not be included in “auto-scan.”
4. Repeat steps 1 through 3 to return a removed channel to the list of
“scanned” channels.
“MENU” MODE FUNCTIONS
The “Menu” mode provides access to the features and functions shown in
the chart below. For additional utility functions, see UTILITY FUNCTIONS.
MXT100 “Menu” Mode Quick Reference Chart
F1 – CTCSS Codes. Use this option to select and assign a Continuous
Tone Coded Squelch System (CTCSS) Privacy Code for the
currently active channel.
F2 – DCS Codes. Use this option to select and assign a Digitally Coded
Squelch (DCS) Privacy Code for the currently active channel.
F3 – Squelch Sensitivity. Use this option to adjust squelch sensitivity.
F4 – Key “Beep” Volume. Use this option to set the volume level for the
keypad audible “beep” tones
F5 – Transmit Power Level. Use this option to change the transmit power
level to HI or LO.
Selecting a Privacy Code
Continuous Tone Coded Squelch System (CTCSS) and Digitally Coded
Squelch (DCS) are systems that allow several users to share the same
channel without disturbing each other. When CTCSS or DCS enabled for a
selected channel, the channel is muted to all incoming signals unless they
carry the correct CTCSS or DCS tone.
midlandusa.com Page 16
To Next Page
Loading...
Need help?
General
