Model MXT100
CARE AND MAINTENANCE
CAUTION: DO NOT use alcohol or cleaning solutions to clean the
radio. DO NOT immerse the radio in water.
1. Use a soft cloth moistened with water to clean the radio.
2. Dry the radio with a dry lint-free cloth should it get wet.
TROUBLESHOOTING GUIDE
If you experience difficulties using your MXT100, refer to the following
chart to correct common operation problems. If you have a problem which
you believe requires service, please call first and speak with a service
technician at 816-241-8500. Many problems can be remedied over the
phone without returning the unit for service.
-- Check vehicle power source (battery);
replace as needed.
-- Check input power connection and/or wires
to vehicle power source.
-- Verify both radios have the same channel
selection and Privacy Code settings.
-- Make sure you are within range of the other
radio.
-- Confirm communication is not affected by
buildings and other structures (see About
-- Make sure keypad “lock” is not on (see
Locking the Keypad).
-- Reset the radio (turn radio off then back on).
-- Adjust the display illumination (see
Adjusting the Display Illumination).