www.midtronics.com
9 – Settings
DCA-8000
43
Set Time
Tap or to enter the hours, minutes, and AM/PM. Tap Set to save the date or Cancel to
exit without saving.
9 50 AM
10 51 PM
11 52
DONE
2. Tap to return to the Shop Information screen.
Device List
Displays connected and linked accessory devices. Additional devices and CVG-2
modules can also be detected and linked to the analyzer.
Add Refresh
Delete Paired Device
Enabled
Add CVG Device
1. Tap to add a CVG.
2. Plug the CVG into the OBDII port of any vehicle.
3. Turn the vehicle ignition on, but do not start the vehicle.
4. A list of detected CVGs is displayed. Tap > next to the desired CVG to select it. If the desired
CVG is not displayed, tap to refresh the list.
NOTE: A passkey number is automatically generated once the Bluetooth pairing
has been established.
A conrmation message is displayed when the CVG has been successfully linked.
5. Tap to return to the Device List screen.
To Next Page
Loading...
