Midtronics DCA-8000

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
22
2 – In Vehicle Charge DCA-8000
4. The Edit Battery Information screen displays vehicle and battery information based on the VIN.


 

Vehicle Year
2010
Rated Ah

Vehicle Make


Side Post
Vehicle Model
G6

Flooded

Gasoline

CCA



590
Back  Reset 
If the displayed information is correct, tap Next to begin the Battery Test or Reset to reset the
parameters to the factory defaults.
5. Tap the box across from each displayed parameter and select the correct information from
the displayed list.
NOTE: See Appendix B for complete parameter descriptions.
NOTE: Tap Find Battery to search for the battery location based on the vehicle
year, make, and model based on the VIN or vehicle year, make, and model selected.
The charger performs a series of tests to determine the overall condition of the battery
before applying a charge. Those steps include measuring the ambient battery temperature,
Cranking Health, Reserve Capacity, Charge Acceptance, and applying a Load Test to the
battery.
The test results are then displayed on the charger screen.
NOTE: If the CVG was used to acquire the vehicle information, the Edit Battery
Information screen is displayed (See Step 3). Tap Next to display the test results..
Battery Test Results


 

 
 
 
 
 
 
 
  F

Send Results  Done