Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
27
Chapter 9: SettingsDSS-5000
Display Settings
Adjust the Controller display including the Brightness,
Sleep Time, and Dim Time. Auto Brightness can also
be turned on and o.
Brightness
Adjust the display Brightness by tapping and holding the
slider, then moving it right or left to make the screen brighter
or darker.
Auto Brightness
Enable and disable Auto Brightness by taping on the check box.
Sleep Time
Adjust the amount of elapsed time before the Controller goes
into a power saving (Sleep) mode. Default = 2 minutes.
Dim Time
Adjust the amount of elapsed time before the Controller goes
into a power saving (Dim) mode. Default = 1 minute.
BMIS Login (Admin Only)
Enter and edit BMIS Login and Password information.
Log into a BMIS account.
Login
Zone3@yourshop.com
Password
• • • • • •
Shop Information (Admin Only)
Access default Shop Information including Store
Name, address, and phone number. Also access
battery test defaults including rating, temperature
units, and decimal separator. Use also to adjust the
tester date and time settings.
Settings Home Date/Time Settings
Test Settings
∑
Create MDCA Log File
Shop Information
Use the onscreen keypad to enter the store name, address, and
phone number.
Store Name
Midtronics
Street Address
7000 Monroe
Street Address 2
City
Willowbrook
State
IL
Zipcode
60527
Phone #
1-630-323-2800
Test Settings
1. Tap to access the test setting defaults. Tap the boxes or
icons to change the values.
Battery Rating
CCA
Temperature Units
F
Decimal Separator
00.00
Create MDCA Log File
Battery Rating
Default battery rating units used when testing batteries.
Temperature Units
Default temperature units used when measuring battery
temperature.
Decimal Separator
Default number display using commas or periods
separators.
Create MDCA Log File
The MDCA function is used by Midtronics technical support.
2. Tap to return to the Shop Information screen.
To Next Page
Loading...
Need help?
General
