• 24 •
Coupon
The COUPON SELECT utility allows you to print one
of the three custom coupons or messages created
in the EDIT COUPON utility. You also have the op-
tion of having no coupon print.
1. Use the UP (p) or DOWN (q) ARROW key, or press the
corresponding numerical key (1, 2, 3, or 4) to move the dot
to the option button of your choice.
1 COUPON 1
2 COUPON 2
3 COUPON 3
4 NO USER COUPON PRINTED
2. If you used the ARROW keys, press the SAVE soft
key to save your setting or the BACK soft key to return
to the COUPON SELECT screen without saving the
changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Edit Coupon
The EDIT COUPON utility allows you to create and
store up to three promotional coupons or messag-
es for your customers.
Its two information screens contain eight lines of text with
a maximum of 17 characters per line. (The COUPON utility
allows you to select which coupon to print at the bottom
of your test results.)
1. Use the UP (p) or DOWN (q) ARROW key, or press the
corresponding numerical key (1, 2, 3, or 4) to move the dot
to the option button of your choice.
1 COUPON 1
2 COUPON 2
3 COUPON 3
2. If you used the ARROW keys, press the SAVE soft key to
save your setting or the BACK soft key to return to the
COUPON SELECT screen without saving the changes.
If you use the alphanumeric keypad
to enter the number preceding the
option button, no additional keypress
is needed to save your selection.
To create and edit a coupon, see the
procedure under “Shop” in this chapter for
using the keypad to enter and backspace
over characters.
To help you edit and center your coupon, use a pencil to write the information in the template below before entering it
into the GR8.
Coupon Template
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
Line 8
Temp
The TEMP. UNITS utility allows you to set the units
of measurement to either Fahrenheit or Celsius.
To set your preference:
1. Use the UP (p) or DOWN (q) ARROW key, or press the
corresponding numerical key (1 or 2) to move the dot to
the option button of your choice.
1 DEGREES F
2 DEGREES C
2. If you used the ARROW (▲▼) keys, press the SAVE
soft key to save your setting or the BACK soft key to
return to the Setup Menu without saving the changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Chapter 4: Setup Menu GR8 1100
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
To Next Page
Loading...
Need help?
General
