EasyManuals Logo
Home>Midtronics>Battery Charger>GR8 1100

Midtronics GR8 1100 User Manual

Midtronics GR8 1100
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
!
Safety Reminder
For safe, ecient, and accurate charging and testing, review
the safety and operating instructions in this manual before
using the analyzer. In addition, follow all manufacturers
instructions and BCI (Battery Council International) safety
recommendations.
We also recommend that you register the GR8 to activate your
warranty. See “Registering Your GR8” on the next page.
!
Safety Precautions
Inspect the battery for damages and check the electrolyte level.
If the electrolyte level is too low, replenish it and fully charge
the battery. Always use the necessary safety precautions when
working with batteries to prevent severe injury or death.
Follow all manufacturers’ instructions and BCI (Battery Council
International) safety recommendations, which include the
following precautions:
DANGER—RISK OF EXPLOSIVE GASES: Batteries can pro-
duce a highly explosive mix of hydrogen gas and oxygen,
even when the battery is not in operation. Always work in a
well-ventilated area. Never smoke or allow a spark or ame
in the vicinity of a battery.
WARNING—REQUIRED BY CALIFORNIA PROP. 65: Bat-
tery posts, terminals, and related accessories contain lead
and lead compounds, chemicals known to the state of Cali-
fornia to cause cancer and birth defects or other reproduc-
tive harm. Wash hands after handling.
Battery acid is highly corrosive. If acid enters your eyes, im-
mediately ush them thoroughly with cold running water
for at least 15 minutes and seek medical attention. If bat-
tery acid gets on your skin or clothing, wash immediately
with a mixture of water and baking soda.
Always wear proper safety glasses or face shield when
working with or around batteries.
Keep hair, hands, and clothing as well as the analyzer cords
and cables away from moving engine parts.
Remove any jewelry or watches before you start servicing
the battery.
Use caution when working with metallic tools to prevent
sparks or short circuits.
Never lean over a battery when testing, charging, or jump
starting.
Never charge a frozen battery. Gases may form, cracking
the case, and spray out battery acid.
Chapter 1: Before You BeginGR8 1100
Chapter 1: Before You Begin
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midtronics GR8 1100 and is the answer not in the manual?

Midtronics GR8 1100 Specifications

General IconGeneral
BrandMidtronics
ModelGR8 1100
CategoryBattery Charger
LanguageEnglish

Related product manuals