Sensor lock
The appliance is fitted with a sensor lock to prevent settings
being changed by mistake during a programme.
All sensors, with the exception of the On/Off sensor, are
locked when the sensor lock is set. A minute minder time can
still be confirmed.
The sensor lock is deactivated as standard. In order to
activate it you will need to alter the default setting (see
"Settings").
To deactivate the sensor lock
^
Touch any sensor.
A message will appear in the display.
^ Touch "OK" until the message goes out.
You can then use the appliance as normal.
The sensor lock is activated a few seconds after touching a
sensor.
Additional functions
35
To Next Page
Loading...
