Miele DG7140 - Selecting a Function or Operating Mode; Entering Numbers; Activating Mobilestart

Using the appliance
22
Selecting a function or operat-
ing mode
The sensor controls for the functions
and operating modes (e.g. Further)
are located above the display (see
“Controls” and “Settings”).
 Touch the sensor control for the de-
sired function.
The sensor control on the fascia panel
lights up orange.
 For functions and operating modes:
set values such as the temperature.
 Under Further: scroll through the
lists until you reach the desired menu
option.
 Confirm withOK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
 Touch the sensor control of the new
function or operating mode.
 SelectChange function? and confirm
withOK, if required.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under Further, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are high-
lighted.
 Touch the or arrow buttons or
swipe to the right or left in the
area until the desired number
is highlighted.
Tip: If you press and hold an arrow but-
ton, the numbers continue scrolling
automatically until you release the arrow
button.
 Confirm withOK.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
 Select the sensor control to activ-
ate MobileStart.
The sensor control lights up. You
can operate your steam oven remotely
with the Miele@mobile app.
Directly operating the steam oven via
the touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the sensor control is lit up.