Miele DG7140 - Miele@Home

Settings
37
Miele@home
The steam oven is a Miele@home-
compatible appliance. Your steam
oven is fitted ex-works with a WiFi
communication module and is suitable
for wireless communication.
There are a number of ways of connect-
ing your steam oven to your WiFi net-
work. We recommend connecting your
steam oven to your WiFi network using
the Miele@mobile App or via WPS.
After installing the Miele@mobile App
on a mobile device, you can do the fol-
lowing:
– Operate your appliance remotely
– Call up information on the operating
status of your appliance
– Call up information on the pro-
gramme sequence of your appliance
– Set up a Miele@home network with
other Wi-Fi enabled Miele appliances
– Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
– Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
– Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
– Set up again
This setting is only visible if a WiFi
network has already been set up. Re-
set the network settings and immedi-
ately set up a new network connec-
tion.
– Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default setting. You must set
up a new WiFi connection to be able
to use Miele@home.
– Set up
This setting is only visible if there is
no existing WiFi connection. You
must set up a new WiFi connection to
be able to use Miele@home.