. . , the indicator light above the tem
-
perature selector flashes.
The indicator light above the tempera
-
ture selector normally only flashes if:
–
a pyrolytic programme has been se
-
lected but the temperature selector is
not at the "." symbol.
–
the temperature selector is at the
"." symbol and the function selec
-
tor is not pointing to a pyrolytic func
-
tion.
If it flashes at any other time there may
be a fault with the appliance (e.g. faulty
thermostat or the appliance has short
circuited). Call the Service Dept.
. . . If there has been a power failure,
and instead of the time of day
"0k00"and "AUTO" flash in the dis-
play?
All pre-set times have been deleted be-
cause of the power failure.
^
Enter the time of day again, and any
other times that you had pro
-
grammed.
. . . If you have turned the buzzer off
by pressing the "l" symbol and
"0k00" has appeared in the timer dis
-
play?
Do not worry. This is not a fault!
The time of day will reappear shortly.
. . . The word "AUTO" flashes in the
timer display.
The buzzer was switched off by press
-
ing the "g" or ")" buttons.
^
Press the "i" button.
The appliance is ready for use again.
Correcting minor faults
61
To Next Page
Loading...
