Miele H6260BP - At the End of the Pyrolytic Cleaning Programme

Cleaning and care
97
Delaying the start time of the
Pyrolytic cleaning programme
Start the programme as described
above and then set the required finish
time within the first five minutes of
starting the programme.
 Select .
 Use the rotary selector to move
the triangle until it appears
under.
 appears in the display:
 Confirm with OK.
When you turn the rotary selector
clockwise, the finish time will appear in
the display. This is calculated from the
actual time of day plus the duration of
your selected Pyrolytic cleaning
programme.
 Use the rotary selector to select
the required finish time.
 Confirm with OK.
The finish time is now set and has been
saved to memory.
The oven heating will now switch off.
The finish time can be changed at any
time up until the start time for the
programme.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Pyrolytic cleaning
programme


h
  

,  and  will appear in the
display.
The door is locked as long as the
symbol is lit up. The symbol will
start flashing as soon as the door lock
has been released.
When the door lock has been released:
–  will go out.
–  flashes.
– a buzzer will sound if the buzzer is
switched on (see "Settings – P2").
 Turn the function selector to .
The visual and acoustic signals are
switched off.
 Danger of burning!
Wait until the oven has cooled down
before removing residual soiling left
in the oven compartment from the
Pyrolytic cleaning programme.
 Wipe any residues (e.g. ash) left
behind after the Pyrolytic cleaning
programme out of the oven
compartment and wipe any residues
off any pyrolytic accessories. The
amount of ash will vary depending on
how dirty the oven was.