EasyManua.ls Logo

Miele H6260BP - The Pyrolytic Cleaning Programme Is Cancelled

Miele H6260BP
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
98
Most soiling can be easily removed
using a clean, damp microfibre cloth,
or with warm water and a little
washing-up liquid on a clean sponge.
Depending on how dirty the oven was
before cleaning, there may be a visible
layer of soiling across the inner glass
pane on the door. This should be
removed using the reverse of a non-
scouring washing-up sponge, a glass
scraper or with a stainless steel spiral
pad and a little washing-up liquid.
Extend and retract the FlexiClip
telescopic runners several times after
running the Pyrolytic cleaning
programme.
Please note:
– The fibreglass seal around the front
of the oven should be handled
carefully. Do not rub and scour it. If
possible, you should avoid trying to
clean it.
– The FlexiClip telescopic runners may
appear discoloured or a lighter colour
in places after they have been
cleaned. This will not affect the
functioning of the runners in any way.
– Spilt fruit juices may cause lasting
discolouration to enamelled surfaces.
This discolouration is permanent but
will not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
The Pyrolytic cleaning programme is
cancelled
If the Pyrolytic cleaning programme is
cancelled, the oven door will remain
locked until the temperature inside the
oven drops to below 280°C. The
symbol will light up until the
temperature has dropped below this
level. The door can be opened as
soon as the symbol starts flashing.
The following will cause the Pyrolytic
cleaning programme to stop:
– Turning the function selector to .
Once the door has been unlocked,
will go out and the time of day will
reappear in the display. If necessary,
start the Pyrolytic cleaning
programme again.
– Turning the function selector to a
different function.
 and will appear in the display.
Once the door has been unlocked,
will go out and  will start to flash.
– A power cut.
 and will appear in the display.
Once the door has been unlocked,
will go out and  will start to flash.
When power is restored,  will light
up until the temperature in the oven
has dropped below 280°C. will
then appear in the display. The door
lock releases and the time of day
reappears.

Table of Contents