Miele KMDA 7774 - Extractor Control and Run-on Time

Operation
36
Extractor
The extractor will switch itself on
automatically if a there is a pan on a
cooking zone and a power level has
been set for that zone. The power level
on the extractor is set to suit to the
power level on the cooktop.
The power level of the extractor can be
manually altered at any time. For light to
heavy cooking vapours, select from
power levels 1 to 3. For short periods of
strong vapours and cooking odours,
e.g. whilst searing meat, select the B
Booster setting.
Setting the power level / Switching
off
 To switch the fan on and set a power
level, touch the appropriate sensor
for the power level you want.
 To switch the fan off, touch the 0
sensor.
If the extractor is not switched off, it
will switch itself off automatically
12hours after the last sensor is
touched.
Booster
The maximum duration for the Booster
is 10minutes.
 To switch the Booster off early, set a
different power level.
Run-on time
It is advisable to run the fan for a few
minutes after cooking has finished. This
helps to neutralise any lingering
vapours and odours in the air. The
following two options are available:
(5minutes) and (15minutes). The
run-on duration will be carried out using
the power level set during activation.
You can change the power level during
the run-on period.
 Touch the or  sensor to activate
the run-on period.
 Touch the,  or 0 sensor to
deactivate the run-on period.
If you switch the cooktop off with
the sensor, the run-on period will
continue through to the end.
Useful tip: To help release vapours
effectively with pans over 15cm high,
place a wooden spoon between the lid
and the pan.