Problem solving guide
71
Problem Cause and remedy
The fan on the ironing
board is not running.
Steam was not used.
The fan only runs when the steam function on the
iron is activated.
The appliance is not yet ready to produce steam.
Wait until the message Ready for use is dis-
played to indicate that steam is ready.
The water container is empty or not inserted.
Refill the water container with fresh mains water
and replace it in the tower.
The steamer is connected.
The fan only runs when the iron is connected.
Connect the iron.
There is a fault with the steam ironing system.
Call Miele Service.
The steam function on
the iron or the steamer
is not working.
The steam ironing system is not connected to the
wall socket.
Insert the plug into the socket correctly and switch
on.
Use the button on the control panel to switch
the steam ironing system on.
The iron or steamer is not connected.
Attach the steam hose of the iron or the steamer to
the steam connection of the tower.
The water container is empty or not inserted.
Fill the water container with fresh water.
Insert the water container into the tower.
Wait until the message Ready for use is dis-
played.
The appliance is not yet ready to produce steam.
Wait until the message Ready for use is dis-
played.
The display is indicating a malfunction.
Rectify the indicated malfunction and proceed as
described in the following pages (see “Display
messages”).
If there is still no steam, contact Miele Service.
To Next Page
Loading...
Need help?
General
