Problem solving guide
72
Problem Cause and remedy
When using the steam
button on the iron,
drops of water or white
deposits escape from
the steam jets.
The selected temperature level on the iron is too low.
Set the temperature selector to at least (see
“Selecting the ironing temperature”).
The iron has not yet reached the selected temperat-
ure.
Wait until the selected ironing temperature has
been reached (see “Selecting the ironing temperat-
ure”).
During a longer ironing break, condensation has ac-
cumulated in the steam hose.
After a break in ironing, do not direct the first burst
of steam onto the garment.
Deposits have formed in the soleplate.
Rinse the soleplate (see “Descaling process”).
To Next Page
Loading...
