Technical Information
19
S2 Canister Vacuums
2.2 Filters
Miele canister vacuums use several types of filters (Super Air Clean, Active
Air Clean, Active HEPA) to provide a clean, healthy environment. See Figure
020-2. Vacuum model will dictate filter(s) type. See Table C-1.
Figure 020-2: Filter Types
Note:
Changing from one type of filter to another type is permitted. (e.g., Active Air
Clean to Active HEPA). See Section 020-4.10 for instructions.
4 Service
4.1 Bag Holder Removal
1. Open the casing top wide.
2. Remove the bag (Figure 020-3, Item 1).
3. Press the holder (Figure 020-3, Item 2) downwards on one side.
4. Remove the holder from its guide.
Figure 020-3: Bag and Holder
4.2 Bag Change Indicator Removal
1. Open the casing top.
2. Lever the bag change indicator from its guide using a small flathead
screwdriver; see Figure 020-4.
a Super Air Clean
b Active Air Clean
c Active HEPA (High Efficiency Particulate Air)
To Next Page
