Miele S2 Series - Accessory Usage and Identification; Suction Power and Filter Troubleshooting

Technical Information
32
S2 Canister Vacuums
2 Function
2.1 Accessories
Figure 040-1: Accessories
The accessory holder can either be clipped in position on the connection stub
or the handle connection sleeve.
For more information, see the operating instructions or the general DTD.
3 Fault Repair
3.1 Suction Power Too Low
Cause:
Floor attachment or suction hose blocked.
Remedy:
Clean the floor attachment or suction hose.
Cause:
Bag full.
Remedy:
Change the bag.
Note:
If the window in the bag change indicator is completely red, then the bag
must be changed.
Cause:
Motor protection filter clogged.
Remedy:
Replace the motor protection filter.
1 Dusting brush
2 Upholstery brush
3 Crevice nozzle
4 Accessory holder