Miele S2 Series - Figure 020-7: Cover Frame Screws; Figure 020-8: Cover Frame Removal

Technical Information
22
S2 Canister Vacuums
Figure 020-7: Cover Frame Screws
7. Hold the base firmly with one hand by pressing down at Figure 020-8,
Item 2. Grasp inside the cover frame at Figure 020-8, Item 3, and pull
straight up, about ¼ to ½ inch, until the handle locking tabs disengage
(audible click).
8. Release the cord reel retainer, Figure 020-8, Item 1, and then remove the
cover frame.
Figure 020-8: Cover Frame Removal
Note:
When re-installing, install the front and rear screws first, then the side screws.