Problem Possible cause and remedy
The oven does not heat
up.
Demo mode has been activated. MES_ appears in the
display.
The oven can be operated but does not heat up.
^
Deactivate Demo mode (see "Settings – P9").
A function has been
selected but the oven is
not working.
There has been a power cut which has caused a
current cooking process to stop.
^
Turn the function selector to the ß position and switch
the oven off.
Start the cooking process again.
i2:00 will appear in the
display with the triangle
V flashing under +.
The power supply was interrupted for longer than
200 hours.
^ Reset the time of day (see "Using for the first time").
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Turn the function selector to ß. The oven is now ready
to use again immediately.
Fxxappears in the
display.
There is a problem that you cannot resolve.
^ Call Miele.
Problem solving guide
108
To Next Page
Loading...
